CitroenC3 1.4 HDI 2005, engine starter removal (most probably is the same for all 1.4 hdi engines) The starter have 3 attachment bolts and 2 electrical points 1. Get access for
600Answers. SOURCE: wheres the filler plug on the expert. put the van on full lock to the left, look under the L/H wheel arch in front of the wheel, just in front of the drive shaft you will see a tin cover held on by 13mm headed bolts, on the back row the tin is cut away a little way up is a bigger bolt head (maybe 16mm) that is the fill plug.BTNTurbo release guidance for technicians along with an instructional video. The PSA 1.6 HDI engine is in popular models such as Citroen C3, Xsara-Picasso, Peugeot 307, Volvo C-30, Ford Focus and more. BTN Turbo always has useful and up to date technical advice to minimise the risk, providing simple procedure in the form of critical Thesolution is to remove the old power steering fluid and replace it with new fluid, before bleeding the system completely. As ever, the Haynes Berlingo manual will be able to Onthe gearbox, remove the release bearing and then inspect each of the sleeve/guide tube, release fork and ball pivot for wear and replace if required. Remove any clutch dust by cleaning the bell housing and fit the new release bearing. Lightly lubricate the clutch splines on the input shaft with high melting point grease and evenly distribute Gw5ZX.